How To Glaze A Window With Putty

Window glazing makes an closed, watertight seal between drinking glass and wood sashes. A pro shows how to glaze a window with putty, a putty pocketknife, and glazier points.

Window glazing is necessary to keep our wooden windows atmospheric condition tight. Windows can exist glazed with either oil-based or h2o-based glazing.

This tutorial contains affiliate links to supplies and tools. Purchases made using these links help back up the Saws on Skates website and allows me to share more than projects and tips with you. There is no cost to you for using these links. Visit my site policies for more than data.

DIY Wood Storm Window

Recently I built a wood tempest window. In that tutorial, I confessed I'k not skillful at glazing a window. The glazing putty always pulls abroad from the frame when I try to smooth it. It feels like it takes me FOREVER to glaze a window, and it'due south frustrating for me.

This time I contacted a local window shop to do the glazing for me. I asked Bill if I could take some pics of the process. Today, I'grand sharing with y'all how an expert glazes a window.

What is Reglazing a Window?

Reglazing a window means removing all of the old glazing putty and calculation new glazing putty. I built a new wood storm window, then my projection needed to be glazed rather than reglazed.

How to Remove Quondam Window Glazing

In that location are several means to remove one-time window glazing. You lot can utilise a estrus gun to soften and remove the old window glazing. You can also apply a window glazing removal tool to remove onetime putty.

I have a give-and-take of caution about removing old window glazing. Equally I mentioned earlier, I'm not proficient at glazing a window. I'm also not proficient at removing window glazing. I've broken the glass every time I tried to remove old window putty!

Onetime window glass is frail, and the glazing points used to hold the glass in place act equally a pressure indicate. One incorrect move near those glazing points and CRACK the glass breaks.

Here's what I exercise instead of completely removing all of the quondam window glazing. I simply remove the loose pieces of glazing with a putty knife. Next, I utilize a ShopVac to remove any balance. So I just replace the areas of missing window glazing.

Oil and Latex Window Glazing

Neb explained to me that there are two types of window glazing bachelor. The original, old-school oil-based window glazing and the more modern water-based window glazing.

Oil-based window glazing is traditional to old windows, takes longer to dry, and I would be able to take the window with me when he was finished.

The water-based window glazing dries more apace, but information technology needs time to set, and so I would demand to go out the window and pick it up subsequently.

I decided to get with the oil-based window glazing so I could take the window with me.

How Long Does information technology Accept Glaze to Dry?

The drawback to oil-based glazing is the time information technology takes to dry out. Bill told me the directions for the glazing he used on my window recommends allowing information technology to dry 30 days before painting. xxx DAYS!

That's a long time! He said that he usually just waits a few days before painting. I waited nigh 21 days before applying a latex exterior stain to my storm window.

The advantage of water-based window glazing is that information technology dries rapidly. This ways it can be painted sooner. Subsequently about three days, it can be painted with any exterior latex paint, or after about a week, information technology tin can be painted with an outside oil-based pigment.

Window Glazing Tools

There are a few tools nosotros'll need to coat a window. We'll need a glass cutter, a point-setting tool, and a putty pocketknife. We'll too need glazing points to agree the drinking glass in place.

How to Glaze a Wood Window

Cut the glass
Install the glazing points
Knead the putty
Push the putty into groove
Utilise a putty pocketknife to bevel the glazing between the glass and wood sash

Step one. Cut the Glass

Beak has more than 30 years of experience working with glass, so he was able to cut the drinking glass for my storm window freehanded. We would probably desire to employ a straightedge and a glass cutter.

Window glazing begins with cutting a piece of glass to fit the opening

Step 2. Install the Glazing Points

Glazing points hold the glass in the window frame while the glazing putty dries. Pecker used a bespeak driver to install the glazing points. We can also utilise a Button Mate Point Setting Tool.

Glazier points hold the window in place before the window glazing can be added

Stride three. Utilise the Putty

The glazing putty is easier to work when information technology'southward warm. Bill kneaded the putty to warm information technology up and then pushed the putty into the rabbet with his fingers.

Window glazing is pushed into the rabbet on the frame

Using a putty knife, he pressed the putty and dragged information technology to form a bevel between the drinking glass and wood sash.

Window glazing makes an airtight, watertight seal between glass and window sashes. Glaze your own windows using glazing putty, a putty knife and glazier points.

Step 4. Paint or Stain

The glazing needs to dry before applying paint or stain. I waited about 21 days before applying two coats of latex exterior stain to my tempest window.

Concluding Thoughts

Window glazing is necessary to keep our wooden windows weather tight. Windows tin can be glazed with either oil-based or water-based glazing. Oil-based glazing is traditional but needs well-nigh 30 days before it tin be painted. Water-based glazing is modern and dries quickly, so it can exist painted sooner.

Thank you for stopping by. If you found this data helpful, would yous please pivot it to Pinterest? Other DIYers would appreciate it and I would too! Give thanks you – Scott

Pin This For Later

Source: https://sawsonskates.com/window-glazing/

Posted by: smithsuand1943.blogspot.com